Automatic Steel Shot Blasting Equipment with Roller Conveyor for
Steel shot blasting equipment
1. Customized design
2. High quality, competitive price
3. Site commissioning
We can design different types shot blasting machine for customers
according to different workpiece requirement.
|The effective cleaning width (mm)||800||1200||1500||2000||2500||3000||4000|
|Dimension of inlet opening (mm)||1600*800||1200*400||1700*400||2200*400||2700*800||3200*800||4200*400|
|The length of cleaning workpiece (mm)||1200-12000||1200-1600||1200-12000||1200-12000||3000-12000||2400-12000||4500-18000|
|The speed of conveyor (m/min)||0.5-4||0.5-4||0.5-4||0.5-4||0.5-4||0.5-4||0.5-4|
|The thickness of cleaning steel sheet (mm)||3-60||3-60||1.5-60||3-60||3-60||3-110||4.5-100|
|Shot ball flow rate (kg/min)||4*120||4*250||4*250||6*250||6*250||6*360||8*360|
|The shot ball first loading (kg)||4000||4000||4000||4500||4500||8000||11000|
|Roll brush adjusting height (mm)||200||200||350||450||600||850||900|
|Air capacity (m3/h)||22000||17560||19000||19550||27758||28050||38000|
|Total power (kw)||90||78.3||113.5||156.6||204.8||224.55|
This machine is a special reciprocating shot blasting machine,
which consists of Blasting chamber, Shot blasting wheel, Roller
conveoyr, Abrasive recycling system (Screw conveyor, Elevator,
Separator), Dust removal system, Electric control system, etc.Blasting chamber
Shot blasting chamber shells adopt profile steel and steel plate
welding structure, is a strong, sealing, spacious operation space
for shot blasting of workpieces. Shot blasting chamber is made by
room body shell, gate, wall around, lateral wall, roof after, guard
Blast wheel assembly
Blast wheel assembly is made up of blast wheel shell, motor,
importing tube, leaf, impeller, directional set of pills, points
wheel, block sand plate, guard board and other components, which
leaves, guard board, etc all wear parts using 20% high-chromium
The screws convey or consist of reducer, screw shaft, conveying
Housing, rolling bearing with bases, etc. It is a kinds of standard
abrasive/sand horizontal conveying device, is an important part of
the abrasive recycling system of the blasting machine.
The bucket elevator consists of speed reducer, upper and lower
rolling barrel, transmission rubber belt, bucket elevator,
enclosure and tightening device, etc.
This machine adopts advanced Model BE full shutter type separator.
The separator is mainly composed of airwash area, barrel sift,
conveying screw, abrasive hopper, manual abrasive controlling
Dust removal system
This machine adopts Cartridge or Bag type dust collector, is
exhausted air produced during working. The dedusting efficiency is
up to 99.6%, powder density is less than 100mg/m`3,much stricter
than the national standard.
Electric control system
Set shot ball circulatory failure alarm function, if any parts of
the system fails, the above components automatically stop running,
to prevent the shot ball stuck and burning power device.