Abrasive Blasting Device Roller Conveyor Shot Blasting Machine for
Roller Conveyor Shot Blasting Machine/Sand Blasting Machines are
ideal for descaling and/or surface preparation for the following
processes such as painting or galvanization.
Structural metal works and metal constructions: removal of oxides
and descaling in order to achieve a surface cleaning and to
determine the appropriate roughness to ensure the adhesion of
|Roller Conveyor Shot Blasting Machine|
|Effective cleaning width||mm||800||1200||1500||2000|
|Inlet size of chamber||mm||1000*1500||1000*1500||1700*1700||2200*1800|
|Length of work piece||mm||1200-12000||1200-13000||1500-13000||2000-13000|
|Size of work piece||mm||800 *1200||1200 *1500||1500 *1500||2000*1600|
|Abrasive flow rate||kg/min||8*120||8*125||8*180||8*250|
|Abrasive initial filing capacity||kg||4000||5000||5000||6000|
How Roller Conveyor Shot Blasting Machine Works:
- Roller through type shot blasting cleaning machine is mainly used
for plate, profile, pipe, bar, structure workpiece surface
treatment, such as wide range of USES, clean up the work piece many
varieties, good effect, simple operation, environmental protection,
such as the indicators meet the national standards, especially
suitable for continuous uninterrupted work, is the main working
principle (VVVF) by the conveying system in the form of the work
piece using roller conveyor to a closed chamber the shot blast
cleaning, use of blasting in the high-speed rotating impeller blade
throws the accelerate to play to the surface of work piece, the
work piece surface impact, scraping, to remove rust, scale, and
dirt on the surface of the work piece, then use high strength
roller and pill spiral shape and high pressure will accumulate pill
on the surface of the workpiece and sweep dust blowing, metal
color, by roller convener is sent out again, so that the work piece
to achieve the purpose of blasting.
- Equipment by the roller conveyor, work piece detection device,
before and after blasting room, room, send roller, blowing system,
tiny circulation system, blasting dusting system and electrical
control system, etc. Is a kind of special mechanical and electrical
integration products, the whole line adopts PLC control, can be
manually and automatically, from artifacts into to blast cleaning,
unloading all process automation, do have a workpiece is no
artifacts, stop, once the workpiece after the tail by chamber
blasting, shot blasting machine stop all shot, effectively avoid
the empty waste phenomenon. If a motion part in the process of
production found that fails, will immediately report to the police,
stop running across the board, computer screen will show the
specific fault location at the same time, to do all the intelligent
test of operation, running, fault alarm.
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* Training how to instal the machine, training how to use the
* Engineers available to service machinery overseas.